Copper saddlers rivets & washers 8 Gauge 4.1mm x 19mm3/4 leather belt bag crafts

Description

Check out my
other items
! for other sizes of copper rivets
Made in the UK
Solid copper saddlers or hose rivets with washers
Size 8 gauge x 3/4 inch
4.1mm shaft x 19.5mm long with a 11mm head and washer
Setting Tool is also made in the UK
The setting tool is sold separately, please choose from the select menu
Rustproof, heavy-duty permanent fastening
Consisting of a flat headed solid rivet and a copper washer. The rivet is put through from one side of the pieces to be joined, and the washer then placed over it as it emerges through on the other. The washer is then set in place by pushing it down with a setting tool. Something with a hole long enough to accept the rivet stub. The stub of the rivet is then either formed into a nice dome with a rivet snap, or gently peened into a closing lump with a small hammer. This is very simple stuff, and any amateur leather worker should be able to do it.
Any questions please ask
Check out my
other items
!
How to Set a Rivet
Punch holes slightly larger than the rivet being set.
Place rivet, post up, through both holes in the leather.
Place washer on the rivet
.
Use the rivet setting tool's straight hole to drive the washer down tight against the material.
Cut the rivet off close to the washer with nippers (wire cutters work fine for this).
Do not cut off flush with the washer, but leave about 1/16 of an inch above the burr.
Place the concave recess of the setter on the washer. Hold perpendicular and strike the tool forcefully, turning to the left then right as you strike. This spreads the end of the rivet over the washer, simultaneously rounding its end.
A few extra blows from the soft faced mallet can be used to flatten the rivet end a bit if desired.
Check out my other items! for other sizes of copper rivets Made in the UK  Solid copper saddlers or hose rivets with washers Size 8 gauge x 3/4 inch  4.1mm shaft x 19.5mm long with a 11mm head and washer Setting Tool is also made in the UK Rustproof, heavy-duty permanent fastening Any questions please ask Check out my other items! How to Set a Rivet Punch holes slightly larger than the rivet being set. Place rivet, post up, through both holes in the leather. Place washer on the rivet.
Check out my other items! for other sizes of copper rivets Made in the UK  Solid copper saddlers or hose rivets with washers Size 8 gauge x 3/4 inch  4.1mm shaft x 19.5mm long with a 11mm head and washer Setting Tool is also made in the UK Rustproof, heavy-duty permanent fastening Any questions please ask Check out my other items! How to Set a Rivet Punch holes slightly larger than the rivet being set. Place rivet, post up, through both holes in the leather. Place washer on the rivet.
Check out my other items! for other sizes of copper rivets Made in the UK  Solid copper saddlers or hose rivets with washers Size 8 gauge x 3/4 inch  4.1mm shaft x 19.5mm long with a 11mm head and washer Setting Tool is also made in the UK Rustproof, heavy-duty permanent fastening Any questions please ask Check out my other items! How to Set a Rivet Punch holes slightly larger than the rivet being set. Place rivet, post up, through both holes in the leather. Place washer on the rivet.
Check out my other items! for other sizes of copper rivets Made in the UK  Solid copper saddlers or hose rivets with washers Size 8 gauge x 3/4 inch  4.1mm shaft x 19.5mm long with a 11mm head and washer Setting Tool is also made in the UK Rustproof, heavy-duty permanent fastening Any questions please ask Check out my other items! How to Set a Rivet Punch holes slightly larger than the rivet being set. Place rivet, post up, through both holes in the leather. Place washer on the rivet.
Check out my other items! for other sizes of copper rivets Made in the UK  Solid copper saddlers or hose rivets with washers Size 8 gauge x 3/4 inch  4.1mm shaft x 19.5mm long with a 11mm head and washer Setting Tool is also made in the UK Rustproof, heavy-duty permanent fastening Any questions please ask Check out my other items! How to Set a Rivet Punch holes slightly larger than the rivet being set. Place rivet, post up, through both holes in the leather. Place washer on the rivet.
Check out my other items! for other sizes of copper rivets Made in the UK  Solid copper saddlers or hose rivets with washers Size 8 gauge x 3/4 inch  4.1mm shaft x 19.5mm long with a 11mm head and washer Setting Tool is also made in the UK Rustproof, heavy-duty permanent fastening Any questions please ask Check out my other items! How to Set a Rivet Punch holes slightly larger than the rivet being set. Place rivet, post up, through both holes in the leather. Place washer on the rivet.
Check out my other items! for other sizes of copper rivets Made in the UK  Solid copper saddlers or hose rivets with washers Size 8 gauge x 3/4 inch  4.1mm shaft x 19.5mm long with a 11mm head and washer Setting Tool is also made in the UK Rustproof, heavy-duty permanent fastening Any questions please ask Check out my other items! How to Set a Rivet Punch holes slightly larger than the rivet being set. Place rivet, post up, through both holes in the leather. Place washer on the rivet.